Dabbsson DBS1000 Pro Portable Power Station - 1024Wh | 2000W

For single DBS1000 Pro unit, you can charge it with standard wall outlet (1200W), solar panels (1200W Max), wall outlet + solar panels(1200W Max) and car charger (126W).

DBS1000 Pro can be charged with solar panels that have MC4 connector at maximum 1200W and the combined voltage and current of the solar panels must be within 12-60 volts and under 25 amps.

Yes, you can use most of the solar panels with MC4 connectors as long as the voltage of the solar panel is within 12V-60V.

By connecting 2 DBS1000 pro with the parallel connector, you can get 2048Wh, 3600W output and use it to power more demanding device. You can also add up to 4 DBS2000B extra battery to get maximum 10240Wh and 4400W AC output.

A single DBS1000 Pro has 1024Wh capacity, 2000W AC output and maximum 1200W AC/solar charging capacity. By adding a DBS2000B extra battery, you can expand the the capacity to 3072Wh, boost the AC output to 2400W, AC charging to 1800W and solar charging to 2400W. You can also do standalone solar charging on DBS2000B extra battery and use the USBA/C ports on it to power your phone, mac and laptop, etc. With this combination, you can choose to use the easy-to-carry main unit as a more portable option or add an extra battery for versitle use. Maximum 2 DBS1000 Pro and 4 DBS2000B can be connected together to reach 10240Wh, 4400W output and 7200W solar charging capacity.

First you'll need to download Dabbsson App from your app store or Dabbsson official website. Then you should connect your phone to home Wi-Fi and turn on the bluetooth. After that you can search the nearby Dabbsson devices or add specific device manually according to the steps.

First you'll need to connect your DBS1000 Pro to the Dabbsson App and make sure that the network is working. Once it is done, you can go to the firmware section on your DBS1000 Pro settings on the App to check for new update and follow the steps to complete the update.

Using Semi-Solid LiFePO4 batteries, DBS1000 Pro has a 4000 + 500 (extra cycles with BMS) before the capacity drop to 80%+. (Tested in lab under 25℃ environment)

1. To make the most use of the battery life, we recommend using the portable power station in an environment of 20℃ to 30℃.
2. In order to prolong the service life of the battery, please charge it to more than 90% before leaving it idle for a long time and the battery must be fully charged once in six months.
3. You can store the DBS1000 Pro at 100% and it will only deplete 10% after 6 months.
4. For safety reasons, the DBS1000 Pro should be store in a dry environment and the temperature should be between 45℃ and -10℃.

The EPS function is to prevent an appliance from losing power when there is a power outage. So you'll need to connect the DBS1000 Pro to a wall outlet and then use it to power an appliance you want to use the EPS on. Turn on the standby mode of DBS1000 Pro and set its AC time out to never in Dabbsson App to keep the power station always on. DBS1000 Pro will enter pass through mode and the power of the grid will flow through the power station and to the appliance. When a power outage hit, the DBS1000 Pro can take over the power supply in 15ms to prevent failure or shut down of the connected appliance.